Cisco Cisco Headset 561 Manuel - Sayfa 5

IP Telefon Cisco Cisco Headset 561 için çevrimiçi göz atın veya pdf Manuel indirin. Cisco Cisco Headset 561 24 sayfaları. Ip phones with multiplatform firmware
Ayrıca Cisco Cisco Headset 561 için: Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (3 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (46 sayfalar), Manuel (40 sayfalar), Yönetim Kılavuzu (48 sayfalar), Kurulum Kılavuzu (39 sayfalar), Hızlı Referans Kılavuzu (7 sayfalar)

Accessories

Cisco Headset 500 Series

Figure 4: Cisco Headset 532

Cisco Headset 561 and 562

Cisco Headset 561 and 562 are two wireless headsets that have been developed for use in today's office. The

Cisco Headset 561 features a single earpiece for extended wear and comfort. Cisco Headset 562 features two

earpieces for use in a noisy workplace.

Both headsets come with either the Standard base or the Multibase for charging your headset, and for monitoring

the headset power level with the LED display. Both bases also displays your call status, such as incoming

call, active call, and calls on mute. If your headset is upgrading the firmware, then the LEDs show the upgrade

progress.

The base connects to the phone using the included Y cable, which plugs into the AUX and headset ports of

the phone.

An AC plug is included for connecting the base to a power outlet. You have to install the power clip for your

region before you can plug in the power adapter.

Occasionally a tone is played over your Cisco Headset 561 or 562. Some of these tones alert you when you

perform an action, such as pressing a button. Other tones warn you that the headset requires attention, such

as when the battery needs recharging, or when you are too far from the base station.

Phone Firmware Release 12.5(1) or later and the defaultheadsetconfig.json file for the Cisco Headset 561 and

562 to function properly with Cisco Unified Communications Manager 12.5(1) or earlier.

Figure 5: Cisco Headset 561

Accessories