Cisco Cisco Unified IP Phone 7960G Yönetim Kılavuzu - Sayfa 11

IP Telefon Cisco Cisco Unified IP Phone 7960G için çevrimiçi göz atın veya pdf Yönetim Kılavuzu indirin. Cisco Cisco Unified IP Phone 7960G 29 sayfaları. Ios telephony services ip phone
Ayrıca Cisco Cisco Unified IP Phone 7960G için: Kullanıcı Kılavuzu (21 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Hızlı Referans (2 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Telefon Kılavuzu (17 sayfalar), Yönetici El Kitabı (15 sayfalar), Kurulum Kılavuzu (12 sayfalar), Kullanıcı Kılavuzu (16 sayfalar), Referans Kılavuzu (24 sayfalar), Manuel (21 sayfalar), Kullanıcı Kılavuzu (10 sayfalar)

Cisco Cisco Unified IP Phone 7960G Yönetim Kılavuzu
Chapter 3
Initializing Cisco Unified IP Phones
Prerequisites
To unlock the phone, follow these steps:
Procedure
Press Settings > Unlock Config.
Step 1
The password prompt appears.
Enter the phone's password.
Step 2
Press Accept.
Step 3
Locked menus are unlocked. The Unlock Config menu choice changes to Lock Config and lockable
menus remain unlocked while you work within the Settings menu.
Note
To manually relock the phone, select Settings > Lock Config.
Step 4

Setting and Restoring Network Parameters

To modify network parameters using the phone menus, follow these steps:
Procedure
Unlock the Network Configuration menu.
Step 1
See the
Select Settings > Network Configuration.
Step 2
The Network Configuration menu appears.
Select the parameters you want to change and set them to the desired values.
Step 3
Network parameters that can be modified are listed in
modified are listed in
Appendix D, "SIP IP Phone Parameters."
Select Save.
Step 4
The phone programs the new information into flash memory and resets.
Relock the phone.
Step 5
OL-7890-01
Set the phone password with the phone_password parameter in the phone-specific configuration file.
When you exit the Settings menu, lockable menus automatically relock.
"Unlocking the Phone" section on page
Table
3-2. For a complete alphabetical list of configurable parameters, see
Cisco Unified IP Phone 7960G and 7940G Administration Guide for Release 8.0 (SIP)
Configuring the SIP Parameters Manually
3-10.
Table
3-1. Network parameters that cannot be
3-11