Cisco IP DECT 6825 Donanım Kurulumu - Sayfa 9

IP Telefon Cisco IP DECT 6825 için çevrimiçi göz atın veya pdf Donanım Kurulumu indirin. Cisco IP DECT 6825 18 sayfaları. Masergy
Ayrıca Cisco IP DECT 6825 için: Kullanıcı Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (37 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Kullanıcı Kılavuzu (7 sayfalar)

Hardware Installation

Step 9

If required, plug the power adapter into the electrical outlet.

What to do next

Configure the Base Station

Mount the Base Station on a Desk

You can place the base station on a desk or other horizontal surface (for example, a book shelf). Select a

location where the base station won't be easily knocked off.

Each base station has a range of up to 984 feet (300 meters).

In this task, the term device means the base station.

Before you begin

You need:

• LAN connection close to the mounting location.

• If you do not use PoE, a power outlet close to the mounting location.

• Ensure that the base station can communicate with the network (see

Determine the best placement, taking into account the coverage area and the building construction materials.

You may need to install addition base stations for best coverage.

You can use the site survey tool on the handset to plan placement.

Procedure

Step 1

Connect the Ethernet cable to the device and route the cable through the slot in the device.

Step 2

If required, plug the power adapter into the device and route the cable through the slot in the device.

Step 3

Slide the stand into the device and press it until it clicks into place.

This graphic shows the stand connection to the base station.

5). After it can communicate and the LED is green, you can unplug the cables if you haven't tested the

base station in the final location.

Mount the Base Station on a Desk

Install the Base Station, on page

Hardware Installation