Cisco M5 Donanım Kurulum Kılavuzu - Sayfa 36

IP Telefon Cisco M5 için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Cisco M5 42 sayfaları.
Ayrıca Cisco M5 için: Temel Kullanım Kılavuzu (12 sayfalar), Bakım Kılavuzu (6 sayfalar)

Cisco M5 Donanım Kurulum Kılavuzu
Connect Cables, Turn on Power, and Verify Connectivity
7
CIMC interface (Disabled in M5)
9
770-W AC power supply (PSU 1)
Redundant as 1 + 1
Step 2
Connect a second Cisco-supported SFP+ transceiver and cable to the SFP port to the right of the eth0 port in Step 1. This
is eth1 used to access the console and allows your Threat Grid M5 to monitor traffic.
Step 3
Use the supported power cords to connect the power supplies of the chassis to your power source. For more information
about supported power cords, see
Step 4
Connect a keyboard to one of the USB ports and a monitor to the VGA port.
Step 5
Power on the appliance and wait for it to boot up.
Step 6
The TGSH Dialog is displayed on the console when the server has successfully booted up and connected. Complete the
Initial Configuration Steps as described in the
Cisco Threat Grid M5 Hardware Installation Guide
32
8
Power Cord Specifications, on page
configuration
guide.
770-W AC power supply (PSU 1)
Redundant as 1 + 1
12.
Rack-Mount the Chassis