Cisco Razorline 7975 Kullanıcı Kılavuzu - Sayfa 10

IP Telefon Cisco Razorline 7975 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco Razorline 7975 14 sayfaları. University voip
Ayrıca Cisco Razorline 7975 için: İşlev Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (30 sayfalar), Hızlı Referans (5 sayfalar), Hızlı Referans Kılavuzu (2 sayfalar)

Cisco Razorline 7975 Kullanıcı Kılavuzu

Helpful Tips

Understanding Lines vs. Calls
It is sometimes easy to confuse lines and calls on your phone. Use
these tips to avoid confusion:
Lines
The Cisco IP Phone 7975 supports up to 8 lines. Each line corre-
sponds to a phone number (or extension) that others can use to
call you.
Calls
Each line can support 2 calls.

Choosing Touchscreen Items

To choose a touch-
Do this...
screen item...
By touch
Press (or tap) an item on the touchscreen with
your fingertip. Pressing a phone number on the
touchscreen can cause the phone to dial the
number.
By scrolling
Press the Navigation button to highlight an item
in a list. Press a relevant soft key such as Select
or Dial to finish the action, or tap the item with
your fingertip.
By item number
Press the corresponding number on your key-
pad. For example, press 4 to choose the fourth
item in a menu.
Page 10

Lift the handset and dial *61

Follow the voice prompts
Note: When entering an external number in the priority list, enter the
10-digit number. Do not include the outside access digit.

Customizing Phone Settings

Adjusting the Volume

If you want to... Then...
Adjust the volume
Press the Volume button during a call or after in-
level for a call
voking a dial tone. You can press Save to save this
volume setting for future calls. Note that the vol-
ume settings for the handset, speakerphone, and
headset must be adjusted separately.
Adjust the volume
Press the Volume button while the handset is in the
level for the
cradle and the headset and speakerphone buttons
ringer
are off. The new ringer volume is saved automati-
cally.
Customizing Ring Tone

Press the Settings button

Select menu item "User Preferences"

Select menu item "Rings"

Select the line you want to customize

Scroll through the list of ring types, pressing the Play soft key
to hear the ring, and the Select soft key to accept the ring.

Press the Save soft key to exit the menu.
Customizing the Display

Press the Settings button

Scroll to menu item "Contrast"
Page 19