Ricoh 4700WD Sistem Ayarları - Sayfa 38

Hepsi Bir Arada Yazıcı Ricoh 4700WD için çevrimiçi göz atın veya pdf Sistem Ayarları indirin. Ricoh 4700WD 42 sayfaları. Savin copier operating instructions

Sayfayı Yazdır

DolphinGB-Syst-F_V4_FM.book Page 26 Wednesday, May 2, 2001 1:19 PM

User Tools (System Settings)

Key Operator Tools

If the access code function has been set, you cannot access the key operator func-

tion unless you enter the access code (up to 8 digits).

❖ ❖ ❖ ❖ Key Operator Access

The encrypted code used to access the management settings is called the ac-

cess code.

This setting specifies whether to use an access code (up to 8 digits) or not. You

can also store the access code when you use the management settings.

• Off

• On

Note

❒ Default: Off

❖ ❖ ❖ ❖ User Code Access

Specifies whether to use user codes to limit or monitor the count for the [Copier]

function.

❖ ❖ ❖ ❖ Key Counter Access

Specifies whether to use the optional key counter to manage the count for the

[Copier] function.

❖ ❖ ❖ ❖ Set Key Card

Specifies whether to use the optional key card to manage the count for the

[Copier] function.

❖ ❖ ❖ ❖ Auto Off Timer

After copying, or no other key operations are performed, the machine turns

itself off (apart from the main power switch) after a specified period. This is

called a Auto Off. This setting specifies the time interval before entering this

mode.

Note

❒ Default: 60 minutes

❒ The time can be set from 1 to 240 minutes.

❖ ❖ ❖ ❖ AOF (Keep It On.)

Makes the Auto Off Timer setting active. Leave this set to on.

For details about this function, contact your service representative.

• On

• Off

Note

❒ Default: On