Cisco Small Business Pro SPA 509G Başlarken - Sayfa 2

IP Telefon Cisco Small Business Pro SPA 509G için çevrimiçi göz atın veya pdf Başlarken indirin. Cisco Small Business Pro SPA 509G 5 sayfaları. Cisco small business spa300 / spa500 series
Ayrıca Cisco Small Business Pro SPA 509G için: Kullanıcı Kılavuzu (18 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (7 sayfalar), Hızlı Kullanım Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (14 sayfalar), Yapılandırma Kılavuzu (12 sayfalar), Yapılandırma Kılavuzu (12 sayfalar), Referans Kılavuzu (6 sayfalar), Kullanıcı Kılavuzu (12 sayfalar), Nasıl Yapılandırılır (4 sayfalar), Hızlı Referans Kartı (2 sayfalar), Hızlı Başlangıç Kılavuzu (7 sayfalar)

Getting Started

Understanding Your Phone Lines and Buttons

Cisco Small Business SPA50X and SPA51X Series SIP IP Phone User Guide

Phone Feature

Line keys

Softkey buttons

Navigation button

Messages button

Hold button

Description

Indicates phone line status. (Not available on the

Cisco SPA502G or Cisco SPA512G.)

When lit:

Green: Line is idle.

Red (steady): Line is active or in use.

Red (flashing): Line is on hold or there is an inbound call.

Orange: Line is unregistered (cannot be used).

These keys can also be programmed by your system

administrator to perform differently than described here

or to add functions such as speed dial, call pickup, or

monitor an extension.

Press a softkey button to perform the action shown on

IP phone screen

the label on the

Note: The Cisco SPA501G has the following four buttons:

Redial—Dials the last number called.

Cancel—Cancels an action (such as a transfer).

Conference—While on a call, press to start a

conference call and dial another number. After

the second party answers, press Conference again to

create the conference.

Transfer—Transfers a call.

Press an arrow key to scroll left, right, up, or down

through items shown on the

on the Cisco SPA501G).

Press to access voice mail. (This feature must be set up

by your phone system administrator).

Press to place a call either on hold or to resume.

NOTE

SPA501 phone does not support this feature.

IP phone screen

(except