Ricoh SGC 1506 Hızlı Kılavuz - Sayfa 7

Hepsi Bir Arada Yazıcı Ricoh SGC 1506 için çevrimiçi göz atın veya pdf Hızlı Kılavuz indirin. Ricoh SGC 1506 12 sayfaları.

Cleaning Print-Heads (Continued)

Reference: See "Clean Printheads", Troubleshooting.

Reference:

Cleaning

Clean

ing

ing Print

Print- - - - H H H H eads

eads

Important

Cleaning print-heads consumes ink.

Perform no other operations during head cleaning.

Head cleaning is not possible if even one color has run out.

Cleaning may be incomplete if ink in a cartridge gets too low or runs out during cleaning.

1) Select [Clean Print-heads] using [▲] or [▼], and then

press the [OK] key.

2) Select the color of which head you want to clean using [▲]

or [▼], and then press the [►] key. A check mark will

appear in the square next to the color you have selected.

Note: You can select more than one color at a time.

Note: You can select more than one col

3) Press the [OK] key.

4) Press [Yes].

Head cleaning begins.

5) Press [Exit] and check the results of head cleaning.

The display goes back to step 1 by pressing [Exit]. Select [Nozzle

Check Pattern] and check the print results.

* If you have repeated head cleaning three times and the problem is

not solved, check the following conditions and then perform

flushing or adjust the head position

When the nozzle is clogged:

Go to step 3 in "Flushing Print-Heads" on page 8 and perform flushing.

When the vertical line is misaligned:

Go to "Adjusting Head Position" on pages 9 and 10 and adjust head position.

6) Press the [User Tools/Counter] key and finish cleaning after checking the normal print results.

or at a time.