Ricoh SP 212w Kurulum Kılavuzu - Sayfa 21
Hepsi Bir Arada Yazıcı Ricoh SP 212w için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Ricoh SP 212w 25 sayfaları.
Ayrıca Ricoh SP 212w için: Kurulum Kılavuzu (24 sayfalar), Kurulum Kılavuzu (24 sayfalar), Kurulum Kılavuzu (24 sayfalar), Kurulum Kılavuzu (24 sayfalar), Kurulum Kılavuzu (24 sayfalar), Kurulum Kılavuzu (24 sayfalar)
Sayfayı Yazdır
Configuring the IP Address Settings Using the Web Image Monitor
Starting Web Image Monitor
Launch the Web browser.
In the address bar, enter "http://(machine's IP address)/".
•
IPv4 Address
Enter the IP address shown on the configuration page.
Use a computer using the IP address shown on the configuration page with its variable part modified.
•
IPv6 Address
Enter the IP address shown in "Link-local Address" on the configuration page. Enclose the IP address in
square brackets, thus: "http:/[fe80:226:73ff:fe47:62e]/".
Configuring the Machine's IPv4 Address Automatically
Launch Web Image Monitor.
Click [Network Status].
Set [DHCP] to [Active].
•
For details about configuring the IPv6 address, see the User Guide
Configuring the Machine's IPv4 Address Manually
Launch Web Image Monitor.
Click [Network Status].
Set [DHCP] to [Inactive].
Specify the IP address in [IP Address].
Specify the subnet mask and default gateway address as required in accordance with the network environ‑
ment.
Specify other settings if necessary.
Enter the administrator password if required.
Click [OK].
•
For details about configuring the IPv6 address, see the User Guide
DCT060
.
DCT061
.
21