Ricoh SP 311DNW Başlangıç Kılavuzu - Sayfa 20

Hepsi Bir Arada Yazıcı Ricoh SP 311DNW için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Ricoh SP 311DNW 45 sayfaları. Network settings guide
Ayrıca Ricoh SP 311DNW için: Hızlı Kurulum Kılavuzu (2 sayfalar), Teknik Özellikler (4 sayfalar), Kurulum Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Appendix

Smart Organizing Monitor utility. Note that you can also confirm connection status using

Image

Monitor.

Before proceeding, please check the following:

Printer power switch is On.

•

You have successfully completed Steps 1-4.

•

To check connection status, proceed as follows:

1. Click [Start]

2. Wait a moment, as software checks for a connection. If the

connection is successful, the displays reads, Ready (or Energy Saver

Mode 2). If the connection failed, the display reads, No Response

from I/O Device.

Succeeded

Note:

To connect manually, e.g., the printer is

•

networked via an Ethernet cable, click [Connect Printer], click

drop-down menu [], and select [Connect Printer]. Enter

printer's IP

search for the printer, click [Search Network Printer].

3. Click [X] to close Smart Organizing Monitor.

Check Connection Status

You can confirm that the connection to your printer is working properly using the

[Smart Organizing Monitor Status].



address, and click [OK]. To perform an automatic

RICOH SP 311DNw B&W Network Laser Printer

Failed

Getting Started Guide

Web