Ricoh SP 311DNW Başlangıç Kılavuzu - Sayfa 39
Hepsi Bir Arada Yazıcı Ricoh SP 311DNW için çevrimiçi göz atın veya pdf Başlangıç Kılavuzu indirin. Ricoh SP 311DNW 45 sayfaları. Network settings guide
Ayrıca Ricoh SP 311DNW için: Hızlı Kurulum Kılavuzu (2 sayfalar), Teknik Özellikler (4 sayfalar), Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
Authentication Select authentication method:
Encryption Select an encryption method.
WEP Key Max.
Length
WEP Key Valid
Characters
7. When finished, click [Apply]
8. Turn printer power switch Off. Wait a moment, and turn On.
9. Next, install Printer Driver & Utility. See
Note:
For further information on Smart Organizing Monitor, please refer to the User Guide, p60.
•
Open System
•
Shared Key
•
WPA2-PSK
•
Mixed Mode WPA/WPA2
•
Note: If Ad Hoc is selected for [Communication Mode], you can select only [Open
System] and [Shared Key].
If [Ad-Hoc] is selected for [Communication Mode], you can select only [None] and
[WEP].
[None]
•
When it is ON, communication will not be secured by encryption.
[WEP]
•
When it is ON, communication will be encrypted in WEP (Wired Equivalent
Privacy).
Specify [WEP Key Length], [WEP Transmit Key ID], and [WEP Key Format] and
enter [WEP Key]. The following table shows the number and types of characters
you can enter, depending on the key settings.
WEP Length is 64 bits
WEP format is Hex
10 characters
0-9, A-F, a-f
[WPA2-PSK]
•
When this is selected, communication will be encrypted with WPA2 (Wi-Fi
Protected Access 2). Enter a value in [WPA Passphrase] that contains from 8 to
64 characters.
• [Mixed Mode WPA/WPA2]
When this is selected, communication will be encrypted with WPA (Wi-Fi
Protected Access) or WPA2 (Wi-Fi Protected Access 2). Enter a value in [WPA
Passphrase] that contains from 8 to 64 characters.
[OK] to save changes, and then click [Close].
3.2 Network Quick
RICOH SP 311DNw B&W Network Laser Printer
WEP format is
WEP format is
ASCII
5 characters
26 characters
0x20-0x7e
0-9, A-F, a-f
Install.
Getting Started Guide
WEP Length is 128 bits
WEP format is
Hex
ASCII
13 characters
0x20-0x7e
39