Cisco SPA300 Series Kullanıcı Kılavuzu - Sayfa 15

IP Telefon Cisco SPA300 Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco SPA300 Series 38 sayfaları. Configure ring type
Ayrıca Cisco SPA300 Series için: Kullanıcı Kılavuzu (12 sayfalar), Hızlı Referans Kartı (2 sayfalar), Hızlı Referans Kartı (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar), Kullanım Kılavuzu (3 sayfalar), Manuel (2 sayfalar), Manuel (2 sayfalar), Hızlı Kullanım Kılavuzu (2 sayfalar)

Getting Started

Installing the Cisco SPA302D

STEP 7

STEP 1

STEP 2

STEP 3

STEP 4

STEP 5

STEP 6

TIP

Cisco SPA302D Mobility Enhanced Cordless Handset User Guide

Place the handset into the charging cradle. The light on the charging cradle

appears solid green when the handset is charging. Charge the handset for a

minimum of 10 hours before using the handset for the first time to ensure that the

handset is fully charged.

Registering the Handset to the Cisco SPA232D Mobility

Enhanced ATA

Install and configure the Cisco SPA232D. See the Cisco SPA232D Quick Start

Guide for more information.

On the Cisco SPA302 handset, press the Select button in the center of the 4-way

navigation keypad.

Using the navigation arrow buttons, scroll to the Settings icon and press the

center Select button to select it.

Select Handset Registration.

Select Register.

On the Cisco SPA232D, press the Page/Registration button and hold it down for

at least seven seconds until the green status light flashes quickly.

If you press the button for fewer than seven seconds, the green status light flashes

slowly, indicating the unit is in "paging" mode and is not in registration mode.

Registration will not work if the unit is in paging mode.