Cisco SPA302D Kullanıcı El Kitabı - Sayfa 22

IP Telefon Cisco SPA302D için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Cisco SPA302D 49 sayfaları. Mobility enhanced cordless handset
Ayrıca Cisco SPA302D için: Kullanıcı Kılavuzu (38 sayfalar), Veri Sayfası (7 sayfalar), Kullanıcı Kılavuzu (10 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Getting Started

The Cordless Handsets and Cordless Base are shipped to you

preconfigured. You do not have to do any configuring or program-

ming of the Cordless Handset. Each Cordless Handset has been

assigned a phone number and extension number. This section de-

scribes the function of the lights on the Cordless Base and some

of the initial phone startup screens.

Cordless Base Basics

The Cordless Base provides wireless connectivity to the Cordless

Handsets. The Lights on the top of the Cordless Base indicate the

current status. After the initial installation and activation, the

SYSTEM and INTERNET lights should remain lit.

The following describes the indicator lights, ports and buttons on

the Cordless Base which, in turn, provides information on the op-

erating state.

Feature

Description

Steady green-The system is ready.

Slow flashing green- Acquiring an IP address, if appli-

cable. (DHCP is used by default.)

Fast flashing green-Upgrading the firmware.

Off-There is no power or the system cannot boot up.

SYSTEM

Flashing green-Transmitting or receiving data

through the WAN port.

Off-No link.

INTERNET

Owner's Manual