Ricoh Aficio AP400N Ek Kılavuz - Sayfa 9

Yazıcı Ricoh Aficio AP400N için çevrimiçi göz atın veya pdf Ek Kılavuz indirin. Ricoh Aficio AP400N 38 sayfaları. Sap printing
Ayrıca Ricoh Aficio AP400N için: Kullanım Talimatları Kılavuzu (20 sayfalar), Manuel (12 sayfalar)

Sayfayı Yazdır

1. Assigning the Ip Address

Assigning the IP Address

Preparation

Configure the machine to use the TCP/IP protocol.

• Make sure that the TCP/IP protocol on the machine is set to active. (The

default is active.)

• Assign an IP address to the machine and configure the other settings re-

quired for using the TCP/IP protocol.

Reference

For more information about how to make the above settings, see the Printer

Reference.

Checking the IP address configuration

Follow the procedure below to make sure that the IP address has been config-

ured correctly.

• The following procedure uses the sample IP address: 192.168.15.16.

A A A A

Enter the following:

# ping 192.168.15.16

If the address has been configured correctly, the following message appears.

192.168.15.16 is alive

If the address has been configured incorrectly, the following message ap-

pears.

no answer from 192.168.15.16

Note

❒ When you use NIS, the IP address and host name are written to /etc/hosts

on the master server. When you use DNS, the information is written to a

data file on the name server. After writing the host name and IP address to

the file, make sure that the configuration is correct by pinging the host

name.

# ping host_name

❒ If the host name is registered with an IP address, the server can access the

printer using its host name instead of its IP address.

Using the Installation Shell Script