Ricoh Aficio MP 7000 Kullanıcı Kılavuzu - Sayfa 10

Yazıcı Ricoh Aficio MP 7000 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ricoh Aficio MP 7000 41 sayfaları. Sap printing
Ayrıca Ricoh Aficio MP 7000 için: Broşür ve Teknik Özellikler (6 sayfalar), Hızlı Başlangıç Kılavuzu (19 sayfalar), Hızlı Başlangıç Kılavuzu (45 sayfalar), Sorun Giderme Kılavuzu (23 sayfalar), Manuel (12 sayfalar)

PaperCut – Ricoh Embedded Manual

copier functions should be disabled and the following screen should display:

2.2.7 Increase Extended Feature Settings Heap / Stack size

We recommend increasing the heap-size setting to the maximum available. To do this:

1. Go to the device's Web Interface , navigate to Device Management->Configuration

2. Select Administrator Tools

3. Under Heap / Stack Size Settings set the Heap Size to the maximum value allowed

by the device (see screenshot below)

To overcome some limitations with the way the Ricoh devices notifies embedded

applications of fax events it is recommended to change the fax transmission mode to

"Immediate TX". This changes fax to only scan documents as they are sent, improving the

reliability of fax logging.

To do this:



At the device LCD press the "Facsimile" button



Press the "Immed. TX" button so that it is highlighted. This button appears toward

the centre right of the Fax screen.



Press the "Program" hard key (above numeric keypad).



Press the "Program as Defaults" button on the screen.



Press the "Program" button on the screen.



Press "Yes" to confirm.

This sets the "Immediate TX" mode as the default transmission mode for all Faxing.

See section 6.1.1 "Fax Tracking Limitations" for information.

Revision: 19

2012-10-26

10 of 41