Ricoh MLP28 Servis Kılavuzu - Sayfa 18

Yazıcı Ricoh MLP28 için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Ricoh MLP28 20 sayfaları. Support guide

Sayfayı Yazdır
Ricoh MLP28 Servis Kılavuzu
G112/G113/G116 Product Support Guide

Service Information:

Firmware Structure
Service Programs to Note
SP Mode
SP 5-907
SP 5-104
A3/DLT Double Count (G116 only)
SP 5-810
SP 5-930
Branding:
Ricoh version machines: No branding necessary.
Savin/Gestetner/Lanier: You must adhere the model label (provided) to the front cover and set the Plug
and Play name with SP 5-907 (SP available to technician only).
V2.0
Model
G112
G112
G112
G112
G112
G113, G116
G113, G116
G113, G116
G113, G116
G113, G116
G113, G116
G113, G116
G113 G116
Description
Plug and Play
Fusing Error Clear
Meter Charge Mode
Firmware Type
Controller, 3 PCMCIA Cards required
Controller 1, Platform & Rescue
Controller 2, Printer
Controller 3, Web Support & Network
Engine, 1 PCMCIA card required
System, SD Card
Printer, SD Card
Websys, SD Card
NCS, SD Card
Netfile, SD Card
Font, SD Card
Engine, SD Card
DESS, SD Card
Savin/Gestetner/Lanier Branding. Requires
selection at install.
No / Yes
Turn main power OFF/ON after SP.
Enabled:
•
"Replace Maintenance Kit" not
displayed. Technician replaces
maintenance kit items.
•
The meter charge counter is displayed
immediately after the Menu key is
pressed.
•
Technician must reset PM counter after
finishing PM.
Disabled:
•
"Replace Maintenance Kit" is displayed
on the operation panel when the PM
counter runs out. The user replaces
the maintenance kit items.
•
The meter charge counter is not
displayed after the Menu key is
pressed.
•
The PM counter resets automatically
after the user replaces the fusing unit.
9/1/2006
Note
Page 18 of 19