Ricoh MP C406 series Kullanıcı Kılavuzu - Sayfa 23

Yazıcı Ricoh MP C406 series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ricoh MP C406 series 32 sayfaları.

3. Other Information for This Machine

This chapter describes laws and regulations related to this machine.

Do not copy or print any item for which reproduction is prohibited by law.

Copying or printing the following items is generally prohibited by local law:

bank notes, revenue stamps, bonds, stock certificates, bank drafts, checks, passports, driver's licenses.

The preceding list is meant as a guide only and is not inclusive. We assume no responsibility for its

completeness or accuracy. If you have any questions concerning the legality of copying or printing

certain items, consult with your legal advisor.

Laser Safety for Type 1

CDRH Regulations

This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This

equipment contains four laser diodes, 648–663 nanometer wavelength. The beam divergence angle is

28 degrees (minimum) and 35 degrees (maximum) in the vertical direction, and 7 degrees (minimum)

and 10 degrees (maximum) in the horizontal direction, and laser beams are generated in Continuous

Wave (CW) mode. The maximum output power of the light source is 9 milliwatt.

Caution

Use of controls or adjustments or performance of procedures other than those specified in this manual

might result in hazardous radiation exposure.

Laser Safety for Type 2

CDRH Regulations

This equipment complies with requirements of 21 CFR Subchapter J for class I laser product. This

equipment contains four 2ch-Laser Diode Arrays (2ch-LDA), 650–663 nanometer wavelength for each

emitter. The beam divergence angle is 15 degrees (minimum) and 25 degrees (maximum) in the vertical

direction, and 7 degrees (minimum) and 13 degrees (maximum) in the horizontal direction, and laser

beams are generated in Continuous Wave (CW) mode. The maximum output power of the light source

is 15 milliwatt.