Cisco Unified 7900 Series Sürüm Notları - Sayfa 6

IP Telefon Cisco Unified 7900 Series için çevrimiçi göz atın veya pdf Sürüm Notları indirin. Cisco Unified 7900 Series 20 sayfaları. Release notes for firmware release 9.3(1)sr2
Ayrıca Cisco Unified 7900 Series için: Sistem Kılavuzu (50 sayfalar), Çözüm Kılavuzu (10 sayfalar), Sistem Kılavuzu (36 sayfalar), Kullanıcı Kılavuzu (11 sayfalar)

Sayfayı Yazdır

Introduction

These release notes support the Cisco Unified IP Phones 7900 Series running SCCP and SIP Firmware Release

9.3(1)SR2.

The following table lists the Cisco Unified Communications Manager release and protocol compatibility for

the Cisco Unified IP Phones.

Table 1: Cisco Unified IP Phones, Cisco Unified Communications Manager, and firmware release compatibility

Cisco Unified IP Phone

Cisco Unified IP Phones 7906G, 7911G, 7941G,

7941G-GE, 7961G, 7961G-GE, 7970G, and

7971G-GE

Cisco Unified IP Phones 7906G, 7911G, 7941G,

7941G-GE, 7961G, 7961G-GE, 7970G, and

7971G-GE

Cisco Unified IP Phone 7931G

Cisco Unified IP Phones 7942G, 7945G, 7962G,

7965G, and 7975G

Cisco Unified IP Phones 7942G, 7945G, 7962G,

7965G, and 7975G

Firmware Release 9.3(1)SR2 is designed and tested to interoperate with Cisco call control, most notably

Note

Cisco Unified Communications Manager Release 9.0(1). Although SIP firmware is IETF RFC 3261

compliant, it is not supported by Cisco TAC or Engineering for use with non-Cisco call control systems.

Cisco Unified IP Phone 7900 Series Release Notes for Firmware Release 9.3(1)SR2

Protocol