Ricoh Pro L5130 Hızlı Başlangıç Kılavuzu - Sayfa 19
Yazıcı Ricoh Pro L5130 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Ricoh Pro L5130 32 sayfaları. Additional function 2
Ayrıca Ricoh Pro L5130 için: Rip Ayarları Kılavuzu (44 sayfalar), Güvenlik Bilgileri Kılavuzu (32 sayfalar), Manuel (12 sayfalar)
Sayfayı Yazdır
CIP Training L5160/L5130
Additional Functions
Modified the Print Mode Selection
How to Select the Print Mode
[Overview]
The method of selecting the print mode has been changed. Media feed adjustment and
Drop position adjustment is executed with the selected print mode when executing these
adjustments. Similarly, Micro setting and Media feed correction are set to the
corresponding print mode.
When media record is retrieving, the adjustment value and print settings are switched to
the value that corresponding to the selected print mode.
Save time to heat the heater with select the print mode used to the next job in advance.
1. Press the [Standard Procedure] key.
2. Press [▼].
3. Press [Print Mode Settings].
4. Select print mode used to the next job.
* If 4C+W device, [12 Pass (W)], [16 Pass (W)],
and [32 Pass (W)] are displayed.
If selected print mode is different between machine and RIP software, print mode setting
on the machine is overwritten when starting job.
Ink Combinations: 4C