Cisco Unified 7912G Kullanıcı Kılavuzu - Sayfa 16

IP Telefon Cisco Unified 7912G için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cisco Unified 7912G 21 sayfaları. Ip talk series
Ayrıca Cisco Unified 7912G için: Kullanıcı Kılavuzu (16 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Telefon Kılavuzu (46 sayfalar), Hızlı Referans (2 sayfalar), Ağ Ayarlarını Yapılandırma (34 sayfalar), Bir Bakışta (20 sayfalar), Referans Kılavuzu (20 sayfalar), Kurulum Kılavuzu (8 sayfalar), Hızlı Referans (4 sayfalar)

Press the Dial soft key.

–

To edit the number on the phone display before dialing, use the following method:

1. Press the Edit soft key to place the cursor at the beginning of the number on the phone display.

2. Use the keypad to edit the digits as needed. Use the backspace (<<) soft key to erase incorrectly entered digits.

3. Press the Dial soft key to place the call.

Clear Call History

To clear all numbers in the directory histories, press the Clear soft key.

Note

The Clear soft key clears all call history lists. Selective clearing of call history lists is not supported.

Audio paging provides a one-way voice path to the phones that have been designated to receive paging. It does not have a

press-to-answer option like the intercom feature.

To use the paging function for paging a group, use the following method:

1. Select an available phone line by lifting the handset. Listen for the dial tone.

2. Dial the designated paging group number.

Each idle IP phone that has been configured with the paging number answers automatically in speakerphone mode, and the

phone displays the caller ID.

3. When you finish speaking your message and hang up, the phones are returned to their idle states.

Cisco Unified Communications Manager Express supports intercom functionality for one-way and press-to-answer voice

connections using a dedicated pair of intercoms on two phones that speed-dial each other.

To use the intercom feature, use the following method:

1. Press the Menu button.

2. Use the Navigation button to select Directories.

3. Use the Navigation button to select Speed Dial.

4. Select intercom Speed Dial.

The called IP phone automatically answers the call in speakerphone mode with mute activated. A beep alerts the recipient

to the incoming call.

To respond to an intercom call, press the Mute button, or lift the handset.