Ricoh SP 200S Yazılım Kurulum Kılavuzu - Sayfa 18
Yazıcı Ricoh SP 200S için çevrimiçi göz atın veya pdf Yazılım Kurulum Kılavuzu indirin. Ricoh SP 200S 21 sayfaları. Software installation guide
Ayrıca Ricoh SP 200S için: Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar), Hızlı Kurulum Kılavuzu (2 sayfalar)
Sayfayı Yazdır
4. Troubleshooting
USB Connection
The USB cable may not be connected properly.
■
Check that the USB cable is connected properly and is undamaged.
The CD-ROM may not be inserted properly.
■
Check that the CD-ROM is inserted properly. Check also that it is not damaged and the CD-
ROM drive is working properly.
Other applications are not closed.
■
When installing software, quit all other applications. Installation may be disrupted if other ap-
plications are open. Also, quit any anti-virus applications that are running.
The machine is turned on before installation.
■
Turn the machine off and then on, and then try "USB Quick Install" again.
Network Connection
The Ethernet cable may not be connected properly.
■
Check that the Ethernet cable is connected properly and is undamaged.
The CD-ROM may not be inserted properly.
■
Check that the CD-ROM is inserted properly. Check also that it is not damaged and the CD-
ROM drive is working properly.
The machine's IP address has not been configured, or the machine and computer are
■
not on the same network.
If the machine does not appear on the network, its IP address has not been configured or it is
on a different network from the computer. In the event of such a problem, check the machine's
IP address and network configuration.
The machine is unable to automatically obtain the IP address.
■
Check whether the DHCP server is working.
Network settings have not been reset.
■
To change the IP address via Smart Organizing Monitor, it is necessary to reset network set-
tings. For details, see "Resetting Network Settings".
18