Cisco Unified 8961 Genel Bakış - Sayfa 28

IP Telefon Cisco Unified 8961 için çevrimiçi göz atın veya pdf Genel Bakış indirin. Cisco Unified 8961 30 sayfaları. Cisco systems telephone
Ayrıca Cisco Unified 8961 için: Sürüm Notları (16 sayfalar), Kurulum Kılavuzu (4 sayfalar), Yönetim Kılavuzu (8 sayfalar), Kullanıcı Kılavuzu (48 sayfalar), Kullanıcı Kılavuzu (10 sayfalar), Özellikler (35 sayfalar), Hızlı Başlangıç (2 sayfalar), Kullanıcı Kılavuzu (22 sayfalar), Kurulum (4 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Referans Kılavuzu (3 sayfalar), Manuel (12 sayfalar), Hızlı Referans (4 sayfalar), Hızlı Bakış (3 sayfalar), Hızlı Kılavuz (10 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), (Portekizce) Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır

Overview of Configuring and Installing Cisco Unified IP Phones

Installing Cisco Unified IP Phones

After you have added the phones to the Cisco Unified Communications Manager database, you can

complete the phone installation. You (or the phone users) can install the phone at the users's location.

The Cisco Unified IP Phone Installation Guide, which is provided on the cisco.com web site, provides

directions for connecting the phone handset, cables, and other accessories.

Before you install a phone, even if it is new, upgrade the phone to the current firmware image. For

Note

information about upgrading, refer to the Readme file for your phone, which is located at:

http://tools.cisco.com/support/downloads/go/Redirect.x?mdfid=278875240

After the phone is connected to the network, the phone startup process begins, and the phone registers

with Cisco Unified Communications Manager. To finish installing the phone, configure the network

settings on the phone depending on whether you enable or disable DHCP service.

If you used auto-registration, you need to update the specific configuration information for the phone

such as associating the phone with a user, changing the button table, or directory number.

Checklist for Installing the Cisco Unified IP Phone 8961, 9951, and 9971

Table 1-10

9951, and 9971. The list presents a suggested order to guide you through the phone installation. Some

tasks are optional, depending on your system and user needs. For detailed procedures and information,

refer to the sources in the list.

Table 1-10

Installation Checklist for the Cisco Unified IP Phone 8961, 9951, and 9971

Task

Purpose

Choose the power source for the phone:

Power over Ethernet (PoE)

•

External power supply

•

Determines how the phone receives power.

The Cisco Unified IP Phone 9971, when being used in a

Note

WLAN environment, requires an external power supply.

Assemble the phone, adjust phone placement, and connect the

network cable. (If you are using the Cisco Unified IP Phone 9971

in a WLAN environment, refer to

Locates and installs the phone in the network.

Monitor the phone startup process.

Adds primary and secondary directory numbers and features

associated with directory numbers to the phone.

Verifies that phone is configured properly.

Cisco Unified IP Phone 8961, 9951, and 9971 Administration Guide for Cisco Unified Communications Manager 8.5 (SIP)

1-28

provides an overview and checklist of installation tasks for the Cisco Unified IP Phone 8961,

Task

5.)

Chapter 1

An Overview of the Cisco Unified IP Phone

For More Information

See the

"Providing Power to the Cisco

Unified IP Phone" section on page

See the

"Installing the Cisco Unified IP

Phone" section on page

3-11.

See the

"Connecting the Footstand" section

on page

3-19.

See the

"Verifying the Phone Startup

Process" section on page

3-21.

2-3.

OL-20861-01