Ricoh SP C242 Series Ürün Yazılımı Güncelleme Kılavuzu - Sayfa 11
Yazıcı Ricoh SP C242 Series için çevrimiçi göz atın veya pdf Ürün Yazılımı Güncelleme Kılavuzu indirin. Ricoh SP C242 Series 14 sayfaları.
Sayfayı Yazdır
Firmware Update Tool Messages
The following table lists the firmware update tool messages that can appear
during a firmware update, and explains the likely causes of those messages
and what action to take when they appear.
(Messages are alphabetically ordered.)
Message
Can't open ROM
file. Please check
ROM file.
Connecting...
Machine is busy.
Causes
The firmware file (*.brn) or
setting file (*.ini) is not stored
in the same folder as the update
tool.
(Note that the setting file only
exists when you are using a
computer running a Windows
operating system.)
The path to the location of the
update tool is too long.
Your computer is searching the
network for the machine.
The machine is being operated
through the control panel.
• There is an unsent fax in the
machine's memory.
• There is a received fax waiting
to be printed.
The [F/W Update (USB)] or [F/W
Update (NET)] button was clicked
when the update was already in
progress.
Solutions
Make sure that the firmware file
(*.brn) and setting file (*.ini) are
stored in the same folder as the
update tool.
Also, make sure that you do not
modify the setting file.
Make sure that the path to the
update tool is not too long. For
convenience, save the update tool
in a subfolder directly under your
computer's C: drive.
Wait a while until the machine is
found.
Cancel any operations being per-
formed through the control panel.
Put the machine into standby
mode, and then perform the
update again.
• Send or delete the unsent fax,
and then try again.
• Print the received fax, and then
try again.
Clicking the [F/W Update (USB)] or
[F/W Update (NET)] button during the
update process does not interfere
with any ongoing update.
Ignore this error message and
complete the update using the
procedure shown in this manual.
11