Ricoh R8 Ürün Yazılımı Güncellemesi - Sayfa 2

Dijital Kamera Ricoh R8 için çevrimiçi göz atın veya pdf Ürün Yazılımı Güncellemesi indirin. Ricoh R8 5 sayfaları. Firmware update
Ayrıca Ricoh R8 için: Broşür ve Teknik Özellikler (8 sayfalar)

Sayfayı Yazdır

2. Extract the firmware

Download the firmware from the Ricoh website.

Double-click or right-click and select [Open] on the downloaded file.

• A dialog screen appears.

Click [OK].

• The folder [R8 Update] is created, and the firmware is extracted to the folder [Firmware

relX.XX (where X.XX is the version number)]. Check that [zlaunch3] (firmware file) and

[zlaunch7] (adjusted value file) are inside the folder [Firmware relX.XX].

For Windows

3. Copy the firmware to an SD memory card

There are two ways to copy the firmware into an SD memory card.

• With an SD memory card loaded in the camera, connect the camera and computer with the

provided USB cable, and copy the firmware to the SD memory card

• Using a card reader or a card writer, copy the firmware to an SD memory card (a card reader

or card writer is required)

To copy the firmware by connecting the camera and computer with the USB

cable

If Caplio Software is installed on your Windows PC, check that RICOH

Gate La is not active.

If RICOH Gate La is active, right-click on the RICOH Gate La icon in the

task bar, and click [Exit].

• If the RICOH Gate La icon is not displayed in the task bar, you do not need to perform Step 2.

Load a battery with adequate remaining power into the camera.

Load the SD memory card into the camera, and turn the power on.

Display the camera's Setup menu, select [Format [Card]], and press the

ADJ./OK button $.

zlaunch3

zlaunch7

For Macintosh

zlaunch3

zlaunch7