Cisco UNIFIED COMMUNICATIONS UC320W Kurulum Öncesi Saha Bilgileri - Sayfa 13

IP Telefon Cisco UNIFIED COMMUNICATIONS UC320W için çevrimiçi göz atın veya pdf Kurulum Öncesi Saha Bilgileri indirin. Cisco UNIFIED COMMUNICATIONS UC320W 29 sayfaları.
Ayrıca Cisco UNIFIED COMMUNICATIONS UC320W için: Hızlı Başlangıç Kılavuzu (4 sayfalar), Hızlı Başlangıç Kılavuzu (6 sayfalar)

Cisco UNIFIED COMMUNICATIONS UC320W Kurulum Öncesi Saha Bilgileri

System Features

Internal Dialing
Extension Length: Circle one.
System Extensions:
System Feature
Auto Attendant
Auto Attendant Prompt Recorder
Voicemail Pilot
External Page (if an external speaker
system is connected)
Music
Meaning of First Dialed Digit: Refer to the information below, and then enter the options for each digit in the table.
For your information:
-
Dial Immediately: The digit is used as a one-digit extension number. For example, in the default settings, a user can
press 0 to immediately dial the Auto Attendant.
-
Extensions: The digit is used as the first digit of an extension number. You may want to use different extension numbers
for different types of extensions. For example, in the default settings, 1 is the first digit in personal extensions (100, 100,
101...) and 2 is the first digit in shared extensions.
-
Voicemail Prefix: The digit is used as a prefix to dial into voice mail. For example, in the default settings, you press 7101
to connect to the voicemail box for mailbox 101.
-
Outside Line: The digit is used to place an outbound call. For each digit with this function, you will specify the FXO
(analog) line or SIP/BRI service to use. For example, in the default settings, you press 9 to get an outside line, and then
you dial the phone number.
-
Not Allowed: This digit cannot be used as the first digit when dialing.
Digit
Purpose
Circle the default setting, or enter a different option (see notes above this table).
For all digits marked "Outside Line," note the trunk to use for outbound calls.
0
Use Default (Dial Immediately)
or Use this option:
1
Use Default (Extensions)
or Use this option:
2
Use Default (Extensions)
or Use this option:
2 digits
3 digits
Extension Number
Keep the default # or enter a # in the space.
Use Default (0) or Use this #:
Use Default or Use this #:
Use Default or Use this #:
Use Default or Use this #:
Use Default or Use this #:
Options for First Dialed Digit
4 digits
Pre-Installation Workbook
13