Cisco Webex 840S Manuel - Sayfa 11

IP Telefon Cisco Webex 840S için çevrimiçi göz atın veya pdf Manuel indirin. Cisco Webex 840S 12 sayfaları. Wireless phone
Ayrıca Cisco Webex 840S için: Hızlı Referans Kılavuzu (3 sayfalar), Manuel (36 sayfalar), Hızlı Referans Kılavuzu (3 sayfalar), Hızlı Referans Kılavuzu (3 sayfalar)

Phone Setup

Configure a TFTP Server

You must configure a TFTP server if your network doesn't provide DHCP option 150 or 66 for the Cisco

Unified Communications Manager that you want to register to.

Note

Configure the DHCP pool with option 150 or 66 if you want to use the automatic configuration method.

Before you begin

You need the following information:

• Local Phone Unlock Password, if the default password was updated

• IP address of the TFTP server

Procedure

Step 1

Access the Cisco Phone

Step 2

Choose one of the following based on your phone's software version:

• For release 1.2, tap the Overflow menu.

• For release 1.3 or newer, tap the Drawer

Step 3

Choose one of the following based on your phone's software version:

• For release 1.2, select Settings > Phone information > Security.

• For release 1.3 or newer, select User settings > Phone information > Security.

Step 4

Enter the Local Phone Unlock Password.

The default password is **#.

Step 5

To enable alternate TFTP servers, swipe the Alternate TFTP slider to the right

Step 6

Enter the TFTP server addresses and tap OK.

Step 7

Tap the back arrow in the upper left corner twice to save your changes and exit the menu.

app.

menu.

Configure a TFTP Server

Phone Setup