ACDC KF-20DW/ZCDC12V Kullanıcı Kılavuzu - Sayfa 7

Klima ACDC KF-20DW/ZCDC12V için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ACDC KF-20DW/ZCDC12V 9 sayfaları.

ACDC 12V Air Conditioner

Getting Started

ACDC 12V air conditioner should be connected to DC 12V battery. Battery should be able to

power up ACDC with 10.5V or above and 16.5V or less. Electrical cable is equipped with the in-

line fuse for protection.

3.1

Visually inspect if the in-line fuse is OK. Replace the fuse with 100A or higher.

To ensure moisture ingress protection degree IP65, make sure the cover is correctly

positioned and sealed with o-ring.  

3.2

1. Check the polarity of the DC voltage before you connect the battery.

Provide an additional fuse for battery protection as recommended by battery

manufacturer.

3. ACDC has a low voltage protection at 10.0V. Contact battery manufacturer if battery

voltage curve falls in adequate range.

3.3

Remote controller can turn on and off the ACDC system. Press the ON button to power up.

Indoor unit can indicate the working condition and display the temperature setpoint. Check if the

outdoor unit power up to cool down the temperature.

3.4

Press the mode button to change the air conditioning condition from AUTO to COOL to DRY to

FAN. AUTO mode controls the cooling mode and fan speed automatically. Push the TEMP UP

and DOWN button to change the target temperature. Refer to the remote controller manual for

detailed operation.

3.5

ON/OFF button can turn the ACDC off.

Cool Air While Keeping the Earth Clean