Ricoh 4372-002 Kullanıcı Kılavuzu - Sayfa 46

Yazıcı Aksesuarları Ricoh 4372-002 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Ricoh 4372-002 50 sayfaları. Printer driver

Chapter 4 Various Settings of PostScript Driver

Various Settings of PostScript Driver

Chapter 4

Configuring the printer driver settings enables you to print using different functions. This chapter describes various

methods for configuring the PostScript Printer Driver.

4.1

Printer-Specific Functions

This section describes setup items for printer-specific functions.

To view [Printer Functions] in the printer driver, see Chapters 2 and 3 "Changing Printer Driver Default Values" and

"Printing from Application Software".

◇ Paper size (default: A4)

Select the paper size you want to print.

Match [Paper Size] with paper settings on the printer

control panel. Care should be taken not to include the

length of feeding holes on both edges of the paper

(1 inch = 25.4 mm) in [Paper Size]. An example of

setting is given below:

For custom size settings,

see

"4.2 Printing on Custom Size Paper"

◇ Print quality (default: 600 x 600 dots per inch)

Specify the printer resolution.

◇ Page rotation (default: None)

Normally, select [None]. You can also choose 90, 180, 270

degree to rotate page image.

When one of 90, 180 or 270 degree is selected,

each printed image is shown in the diagram below.

◇ Collate (default: On)

When Collate option is enabled (On), a print job with

multiple copies is sent once for multi-copy output and can

be printed in page order.

If disabled, each page is repeated for multiple copies.

4-2

Some of applications provide a [Collate] check

box option in their Print dialog.

Make sure that Collate option is turned off

(unchecked). If Collate is checked and multiple

copies printing is required, print speed may be

slow down because print data increases

compared with one copy.

Even if Collate option is unchecked in Print

dialog opened from application software, a job

can be printed in page order by a copy

when Collate option under [Printer Features] in

[Advanced Option] dialog is [On].