Ricoh D3EV Saha Servis Kılavuzu - Sayfa 11
Yazıcı Aksesuarları Ricoh D3EV için çevrimiçi göz atın veya pdf Saha Servis Kılavuzu indirin. Ricoh D3EV 38 sayfaları. Bypass tray
Sayfayı Yazdır
2.
Disconnect the ground wire and open the clamps .
3.
Disconnect the harnesses.
4.
At the front, disconnect hinge plate [1] and swing the hinge plate to the right (
5.
At the rear, disconnect hinge plate [2] (
6.
Carefully disconnect the hinge and spring [3].
7.
Pull the harnesses through the frame [1].
8.
Remove the feed tray [2].
9.
Turn over the feed tray. There are three sensors on the bottom of the feed tray.
Paper end sensor
Paper width sensor
Paper length sensor
1.Replacement and Adjustment
x1).
x1).
7