Cisco 10/100 16-Port VPN Router RV016 Hızlı Kurulum Kılavuzu

Ağ Yönlendiricisi Cisco 10/100 16-Port VPN Router RV016 için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Cisco 10/100 16-Port VPN Router RV016 2 sayfaları. Cisco systems 10/100 16-port vpn router quick installation

Sayfayı Yazdır

A Division of Cisco Systems, Inc.

Package Contents

• 10/100 16-Port VPN Router

• User Guide CD-ROM

• AC Power Cable

• Rack Mounting Kit

• Quick Installation

• Registration Card

Quick Installation

10/100 16-Port

VPN Router

Quick Installation

WIRED

RV016

Model No.

Connect the Router

Before you begin, make sure

that all of your hardware is

powered off, including the

Router, PCs, hubs, switches,

and cable or DSL modem.

Connect one end of an Ether-

net network cable to one of

the numbered ports on the

front of the Router (see Figure

B). Connect the other end to

an Ethernet port on a network

device, e.g., a PC, print server,

hub, or switch.

Repeat this step to connect

more PCs or other network

devices to the Router.

Connect your cable or DSL

modem's Ethernet cable to

the Router's Internet port. If

using multiple Internet ports,

connect a cable to each Inter-

net port you'd like to use, and

connect the other end to your

modem. See Figure C.

Power on the cable or DSL

modem and the other network

device if using one.

Connect the included AC

power cable to the Router's

Power port on the back of the

Router, as shown in Figure E,

and then plug the other end of

the power cable into an elec-

trical outlet.

The System LED on the front

panel will light up as soon as

the power adapter is con-

nected properly.

Configure the Router

Configuring the Router requires the

setup instructions provided by your

Internet Service Provider (ISP). If you

do not have this information, con-

tact your ISP before proceeding.

NOTE:: Make sure your PC's

Ethernet adapter is set to obtain

Your ISP determines how your PC is

an IP address automatically. For

set up for Internet access. Because

more information, refer to Win-

you are now using the Router to

dows Help.

share Internet access among sev-

eral computers, you will use the

setup information to configure the

Router instead of your PC.

Open your PC's web browser.

Enter http://192.168.1.1 (the

Router's default local IP

address) in the web browser's

Address field and press the

Enter key.

Enter a User Name and Pass-

word on the screen that

appears. Enter admin (the

default) in the the User Name

and Password fields. Then, click

the OK button.

The Router's Web-based Utility

will appear with the System

Summary screen showing.

Click on the Setup tab, which is

the next tab over, then con-

tinue with the instruction,

below, to complete the Net-

work page.