Cisco 12000 - Series Chassis Modular Expansion Base Değiştirme Talimatları Kılavuzu - Sayfa 29

Ağ Yönlendiricisi Cisco 12000 - Series Chassis Modular Expansion Base için çevrimiçi göz atın veya pdf Değiştirme Talimatları Kılavuzu indirin. Cisco 12000 - Series Chassis Modular Expansion Base 40 sayfaları. Internet router line card failures
Ayrıca Cisco 12000 - Series Chassis Modular Expansion Base için: Veri Sayfası (9 sayfalar), Genel Bakış Kılavuzu (6 sayfalar), Donanım Sorun Giderme Kılavuzu (18 sayfalar)

Sayfayı Yazdır

Cisco 12000 - Series Chassis Modular Expansion Base Değiştirme Talimatları Kılavuzu

Figure 14

Immediately place the SODIMM in an antistatic bag to protect it from ESD damage.

Step 7

Installing a SODIMM

To install a SODIMM, follow these steps:

Step 1

Attach an ESD-preventive wrist strap and follow its instructions for use.

Step 2

Place the line card on an antistatic mat so that the faceplate is nearest to you.

Step 3

Check the retaining clip to make sure it has not been damaged or bent.

Figure 15

If the retaining clip is damaged, do not use it. This can damage the SODIMM socket.

Caution

The retaining clip is not used with all ISE, Engine 4, and Engine 4+ line cards. If your SODIMM socket

Note

does not include the retaining clip; there is no problem. Simply ignore any instructions that refer to the

clip.

78-4338-16

Removing a SODIMM

SODIMM Socket Retaining Clip

Removing and Installing Line Card Memory

45 º

Cisco 12000 Series Router Memory Replacement Instructions