Cisco 12406 series Değiştirme Talimatları Kılavuzu - Sayfa 26
Ağ Yönlendiricisi Cisco 12406 series için çevrimiçi göz atın veya pdf Değiştirme Talimatları Kılavuzu indirin. Cisco 12406 series 44 sayfaları. Chassis replacement instructions
Ayrıca Cisco 12406 series için: Ambalajdan Çıkarma Talimatları Kılavuzu (16 sayfalar), Veri Sayfası (9 sayfalar)
Sayfayı YazdırUse two persons to support the chassis while a third person removes the screws securing the chassis to
Step 3
the equipment rack.
Caution
Follow the safe lifting guidelines as outlined in Statement 5 of the Regulatory Compliance and Safety
Information for Cisco 12000 Series Routers publication (Document Number 78-4347-xx) while lifting
the chassis and setting it safely aside.
Removing the Chassis When the Chassis is Mounted Using the Center-Mount Brackets
If the chassis is installed using the center-mount brackets, see
the chassis from the equipment rack:
Step 1
Ensure that all cables are disconnected and moved out of the way.
Note the positions of the rack-mounting screws on the defective chassis and mark the same screw holes
Step 2
on the rack-mounting flanges of the replacement chassis.
This step helps you align the replacement chassis with the narrow upper center-mount brackets when you
insert the replacement chassis into the rack.
Step 3
Loosen, but do not remove, the screws that attach the chassis to the center-mount brackets.
Step 4
Use two persons to support the chassis while a third person removes the screws securing the chassis to
the equipment rack.
Caution
Follow the safe lifting guidelines as outlined in Statement 5 of the Regulatory Compliance and Safety
Information for Cisco 12000 Series Routers publication (Document Number 78-4347-xx) while lifting
the chassis and setting it safely aside.
Cisco 12006 and Cisco 12406 Router Chassis Replacement Instructions
26
Figure 18
and follow these steps to remove
78-16109-01