Epson EMP 7800 Hızlı Referans Kılavuzu - Sayfa 5

Projektör Epson EMP 7800 için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Epson EMP 7800 16 sayfaları. Projector
Ayrıca Epson EMP 7800 için: Hızlı Başlangıç Referans Sayfası (7 sayfalar), Başlangıç Kılavuzu (10 sayfalar), Teknik Özellikler (4 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (28 sayfalar)

Epson EMP 7800 Hızlı Referans Kılavuzu
Select the images to be projected.
If only one signal source is connected, images from that source will be projected automatically.
If more than one device is connected to the projector, use the [Source] button to select the image source to be projected.
To select images to be
projected while viewing
all images being input
(Preview Function)
If the source does not
change to a laptop PC
If using the
or
buttons to select the source, you can change the signal setting by
pressing the button repeatedly.
Active window
Computer (Analog-RGB)
Computer
DVI
BNC
Video
S-Video
Examples of changing output
NEC
Panasonic
TOSHIBA
IBM
SONY
FUJITSU
After startup, change the Control
Macintosh
Panel adjustments so that mirroring
is active
1. Press the
button.
The image can be changed directly by selecting the desired
image source with the [Source] button.
2. To view the images in more detail, switch to the active window.
Tilt the
button to select an image and then press the
button.
3. Project the images in the active window.
Press the
button.
User's Guide "Selecting an Image Source While
Viewing Projected Images (Preview Function)"
You may need to change the output destination using the
keyboard or by changing settings.
To change, hold down the
(with a symbol such as
Once the setting is changed, projection will start after a short
period.
If images are still not projected after carrying out the above,
see p.12.
key and press the
key
or
on it).
Computer documentation