Epson EMP 810 Ağ Kurulum Kılavuzu - Sayfa 4

Projektör Epson EMP 810 için çevrimiçi göz atın veya pdf Ağ Kurulum Kılavuzu indirin. Epson EMP 810 37 sayfaları. Esc/vp21 command user's guide for business projectors
Ayrıca Epson EMP 810 için: Hızlı Referans Kılavuzu (17 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Teknik Özellikler (1 sayfalar), Kullanıcı Kılavuzu (28 sayfalar)

Sayfayı Yazdır

Wireless Network Installation

To add the printer to your wireless network, you need to know the name (SSID)

of your wireless network. If it has security enabled, you also need to know the

WEP key or WPA passphrase. Write down your network and security information

in the space provided below:

■

Network name (SSID): _________________________________________

■

WEP key or WPA passphrase: ____________________________________

Note:

Your printer is compatible with 802.11b and 802.11g. If your router or access point

supports 802.11n (Wireless N), makes sure it is set to compatibility mode to allow

802.11b and 802.11g devices to connect to it.

Your printer supports the following wireless security modes: WEP, WPA, and WPA2.

If you don't know your wireless network name (SSID), WEP key, or WPA passphrase,

contact the person who set up your wireless network before you begin.

If your WPA passphrase contains upper- or lowercase letters, be sure to note it

correctly.

Connect Wirelessly Using the Setup Wizard

Follow the steps below to connect to your wireless network.

1. Press the

Home

panel.

Wireless Network Installation

button, if necessary, and select

on the printer's control

Setup