ActronAir RC-03 Kullanım Kılavuzu - Sayfa 13

Uzaktan Kumanda ActronAir RC-03 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ActronAir RC-03 16 sayfaları.

Sayfayı Yazdır

Operation Manual

GEAR Function (not available for Mini-Cassette)

Gear mode is a setting that can limit the energy consumption output of the air conditioner if the end user desires

reduction in their overall system energy usage.

This will impact performance in some conditions.

Press the

button to enter the following:

75%(up to 75% electrical energy consumption)

50%(up to 50% electrical energy consumption)

Previous setting mode.

06.09. SET Function

1. Press the SET button to enter the function setting.

2. Keep pressing the SET or

will flash on the remote control display.

3. Press the OK button to confirm.

Available SET functions are as follows:

Active Clean*

Fresh*

*These functions will are disabled when not available with the unit. Selecting this function will not send any command to

the unit.

• ACTIVE CLEAN Function (not available for Mini-Cassette)

The Active Clean Function washes away accumulated dust, mold, and grease that may cause odors when it

adheres to the heat exchanger. The unit will automatically freeze the heat exchanger and then rapidly thaw the

frost to wash and drain away the accumulated dirt.

When this function is activated, the indoor unit display window shows

turn off automatically and cancel Clean function and return to previous operation.

• FRESH Function (not available for Mini-Cassette and Cascade)

When the FRESH function is initiated, the Ionizer/Plasma Dust Collector (depending on models) is energised and

will help to remove pollen and impurities from the air.

NOTE

This function may not remove all contaminants form the unit and it is recommended to have the system

professionally serviced for a thorough clean.

• SLEEP Function

When sleep function is activated it adjusts and maintains the temperature while you sleep and can save energy.

For more detail on this function please refer to Sleep Operation in Owner's Manual.

NOTE

The SLEEP function is not available in FAN or DRY mode.

to select the desired function. The symbol of the selected function

buttons

Sleep

Follow Me

Operation Manual - RC-03 Controller

Document: 9590-4017 Ver. 1 220318

Remote Controller

AP Mode

Active Clean*

, after 20 to 45 minutes, the unit will

.....