ActronAir SWB26C/E Kullanıcı Kılavuzu - Sayfa 3

Uzaktan Kumanda ActronAir SWB26C/E için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. ActronAir SWB26C/E 8 sayfaları. Air conditioner

Sayfayı Yazdır

Remote Controller Specifications

Model
RG35A/BGEF
3.0V(Dry batteries 1.5V AAA x 2)
Rated Voltage
Signal Receiving
8m (when using 3.0 voltage, it gets 11m)
Range
Environment
-5ºC 60ºC
Performance Feature
1. Operating Mode: AUTO, COOL, DRY, HEAT (applicable to Cooling & Heating
models only) and FAN.
2. Timer Setting Function in 24 hours.
3. Indoor Setting Temperature Range : 17ºC~30ºC.
4. Full function of LCD (Liquid Crystal Display).

Function buttons

ON/OFF Button (
1
Operation starts when this button is pressed
and stops when this button is pressed again.
MODE Button
2
SWING Button
3
swing feature.
O N / O F F
DIRECT Button
4
1
Used to change the louvre movement and set
8
the desired up/down air flow direction. The
SHORTCUT
M ODE
2
9
louvre changes 6 in angle for each press.
FAN
S WING
TEMP
SPE ED
10
3
SLEEP Button
5
TIMER
TIMER
D IRECT
ON
OFF
Active/Disable SLEEP function. The Sleep function
11
4
enables the unit to automatically increase (cooling)
TU RB O
LED
SEL FCLEAN
FOLLOW ME
SLEEP
or decrease (heating) 1ºC per hour for the first two
12
5
hours, then holds steady for the next five hours, after
RESET
LOCK
6
that the unit will stop operation. this fuction is only
13
available under Cooling, Heating and AUTO operations.
7
14
NOTE: While the unit is running under SLEEP
mode, it would be cancelled if you press the MODE,
FAN SPEED or ON/OFF button.
TIMER ON Button
6
Press this button to initiate the auto-on time
sequence. Each press will increase the
auto-timed setting in 30 minutes increments.
When the setting time displays 10H, each
press will increase the auto-timed setting
60 minutes increments. To cancel the
auto-timed program, simply adjust the
auto-on time to 0:0.
)
Each time the button is pressed, the operation
mode is selected in a sequence of following:
AUTO
COOL
DRY
HEAT
O
FAN