Cisco 1805 Donanım Kurulum Kılavuzu - Sayfa 2

Ağ Yönlendiricisi Cisco 1805 için çevrimiçi göz atın veya pdf Donanım Kurulum Kılavuzu indirin. Cisco 1805 12 sayfaları. Integrated services router
Ayrıca Cisco 1805 için: Takma ve Değiştirme (4 sayfalar), Hızlı Başlangıç Kılavuzu (4 sayfalar), Veri Sayfası (10 sayfalar)

Sayfayı Yazdır

Modules Internal to the Cisco 1805 Cable Router

Read the installation instructions before you connect the system to its power source. Statement 1004

Warning

Hazardous network voltages are present in WAN ports regardless of whether power to the router is

Warning

OFF or ON. To avoid electric shock, use caution when working near WAN ports. When detaching

cables, detach the end away from the router first. Statement 1026

Modules Internal to the Cisco 1805 Cable Router

This section tells how to install a small-outline dual in-line memory module (SODIMM) and an

advanced integration module (AIM) in the Cisco 1805 cable router. It contains the following

subsections:

•

All the module replacement procedures in this section require removal of the chassis cover. Before you

perform any of the module replacement procedures, disconnect the power and remove the cover as

described in the

procedures, install the chassis cover as described in the

Opening the Chassis

To open the chassis, follow these steps. You need a number one Phillips screw driver to complete this

procedure.

Step 1

Make sure that the router is turned off and is disconnected from AC power.

Turn the router upside-down, and rest the top of the router on a flat surface.

Step 2

Use the Phillips screwdriver to remove the screw that holds the top and bottom of the chassis together.

Step 3

(See

Cisco 1805 DOCSIS Cable Router Hardware Installation Guide

8-2

Opening the Chassis, page 8-2

Locating Modules, page 8-4

Installing a SODIMM, page 8-5

Installing an AIM, page 8-6

Closing the Chassis, page 8-10

"Opening the Chassis" section on page

Figure

8-1.)

Chapter 8

Installing and Upgrading Internal Modules in Cisco 1805 Cable Routers

8-2. After you complete the module replacement

"Closing the Chassis" section on page

8-10.

OL-14661-01