ActronAir CP05 Kurulum Kılavuzu - Sayfa 3
Kontrol Ünitesi ActronAir CP05 için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. ActronAir CP05 16 sayfaları. Control interface
Sayfayı Yazdır
CP05 & CP10 CONTROL INTERFACE INSTALLATION GUIDE
SPECIFICATIONS:
Control Interface (CP05) Technical Specifications:
Display
Type:
Backlighting:
Graphic resolution:
Text mode:
Character height:
Size of active area:
Size of display area:
Power supply
Voltage:
Maximum power input:
Maximum cable length (Note: To reach the maximum length, use a bus layout with branches not exceeding 5m)
Maximum pLAN length:
Max. OD Controller terminal distance:
(Wires must be approved for 75
Materials
Transparent front panel, cover glass/frame: Transparent polycarbonate
Charcoal grey container back piece :
Film keypad:
Self extinguishing classificaion:
Others
Index of protection:
Operating conditions:
Storage conditions:
Software class and structure:
Classification according to protection
against electric shock:
PTI of insulating materials:
Period of elect stress across insul. parts
Category of resistance to fire and heat:
Immunity against voltage surges:
Environmental pollution:
ActronAir is constantly seeking ways to improve the design of its products, therefore specifications are subject to change without notice.
Copyright © 2022 Actron Engineering Pty. Ltd.
FSTN graphic
White LEDs
132x64 pixel
8 rows x 22 columns (font sizes 5x7 and 11x15 pixels)
4 rows x 11 columns (font size 11x15 pixels)
or mixed modes
2mm (font 6x8 pixels)
4mm (font 12x16 pixels)
36.94x15.98mm
38.9x19.4mm
pLAN port: power supply from OD Controller through telephone cable.
18/30 VDC Class II only
0.5W
500m with 6 Core (3 Pair) Twisted Pair 7/0.20 (AWG24) Shielded Data Cable
50m with 6 Core Flat 7/0.12 (AWG28) Telephone Cable
o
C temp.
500m with 6 Core (3 Pair) Twisted Pair 7/0.20 (AWG24) Shielded Data Cable
Polycarbonate + ABS
Polycarbonate film
V0 for back piece, V2 for transparent front panel,
HB for film keypad and remaining parts
IP65
-20 to 60
o
C, 90% RH non-condensing
-20 to 70
o
C, 90% RH non-condensing
A
To be integrated into class 1 or 2 devices
175
Long period
Category D and category B
Category II
2
3