Epson EMP-7850 Kullanım Kılavuzu - Sayfa 39

Projektör Epson EMP-7850 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Epson EMP-7850 41 sayfaları. Esc/vp21 command user's guide for business projectors
Ayrıca Epson EMP-7850 için: Hızlı Referans Kılavuzu (20 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (28 sayfalar)

Sayfayı Yazdır
Epson EMP-7850 Kullanım Kılavuzu
Setting, Monitoring and Controlling from a Computer
The details of the problem are listed on separate lines. The following table
shows the details that are given in the message for each item.
Message*/Cause
Internal error
s
Fan related error
Sensor error
Lamp cover is open.
Lamp timer failure
Lamp out
Internal temperature
error
High-speed cooling in
progress
Lamp replacement
notification
No-signal
No video signals are being input to the projector.
Check the connection status or check that the
power for the signal source is turned on.
*A (+) or (–) will be appended to the start of the message.
(+): When a projector problem has occurred
(–): When a projector problem has been solved
Remedy
"Reading the Indicators"
in the User's Guide.

Management Using SNMP

When the projector and a computer are connected by wireless LAN access
point mode or Wired LAN connection mode, it is possible to perform
projector monitoring, control, and error messaging from the computer
using
SNMPg
and the SNMP manager program.
For details, please contact one of the service offices provided in the
catalog.
TIP
The administrative function using SNMP uses a SNMP management
•
program. For this reason, it should be used by a person familiar with
networks, such as a network administrator.
The administrative function using SNMP cannot be used on a wireless LAN
•
in Easy connect mode.
EasyMP Operation Guide
38