Cisco 2821 Series Operasyonlar - Sayfa 11
Ağ Yönlendiricisi Cisco 2821 Series için çevrimiçi göz atın veya pdf Operasyonlar indirin. Cisco 2821 Series 31 sayfaları. 2800 series integrated services routers
Ayrıca Cisco 2821 Series için: Kurulum ve Yükseltmeler (21 sayfalar), Veri Sayfası (20 sayfalar), Operasyonlar (31 sayfalar), Hızlı Başlangıç Kılavuzu (47 sayfalar)
Sayfayı Yazdır
The following table describes the meaning of Ethernet LEDs on the front panel:
Name
Activity
Duplex
Speed
Link
The physical interfaces are separated into the logical interfaces from FIPS 140-2 as described in
the following table:
Router Physical Interface
10/100 Ethernet LAN Ports
HWIC Ports
Console Port
Auxiliary Port
ENM Slot
VeNoM Slot
USB Ports
10/100 Ethernet LAN Ports
HWIC Ports
Console Port
Auxiliary Port
ENM Slot
VeNoM Slot
USB Ports
10/100 Ethernet LAN Ports
HWIC Ports
Power Switch
Console Port
Auxiliary Port
ENM Slot
10/100 Ethernet LAN Port LEDs
AIM LEDs
PVDM LEDs
Power LED
Activity LEDs
Auxiliary LED
Compact Flash LED
Console Port
Auxiliary Port
USB Ports
© Copyright 2007 Cisco Systems, Inc.
This document may be freely reproduced and distributed whole and intact including this Copyright Notice.
Solid Orange
AIM0 installed and initialized error
Table 6 – 2821 Rear Panel Indicators
State
Description
Off
Solid/Blinking Green
Off
Solid Green
One Blink Green
Two Blink Green
Off
Solid Green
Table 7 – 2821 Ethernet Indicators
11
Not receiving packets
Receiving packets
Half-Duplex
Full-Duplex
10 Mbps
100 Mbps
No link established
Ethernet link is established
FIPS 140-2 Logical Interface
Data Input Interface
Data Output Interface
Control Input Interface
Status Output Interface