Cisco 2821 Series Operasyonlar - Sayfa 7
Ağ Yönlendiricisi Cisco 2821 Series için çevrimiçi göz atın veya pdf Operasyonlar indirin. Cisco 2821 Series 31 sayfaları. 2800 series integrated services routers
Ayrıca Cisco 2821 Series için: Kurulum ve Yükseltmeler (21 sayfalar), Veri Sayfası (20 sayfalar), Operasyonlar (31 sayfalar), Hızlı Başlangıç Kılavuzu (47 sayfalar)
Sayfayı Yazdır
Auxiliary Power
Activity
Compact Flash
Name
PVDM1
PVDM0
AIM1
AIM0
The following table describes the meaning of Ethernet LEDs on the rear panel:
Name
Activity
Duplex
Speed
Link
The physical interfaces are separated into the logical interfaces from FIPS 140-2 as described in
the following table:
Router Physical Interface
10/100 Ethernet LAN Ports
HWIC Ports
Console Port
Auxiliary Port
ENM Slot
USB Ports
© Copyright 2007 Cisco Systems, Inc.
This document may be freely reproduced and distributed whole and intact including this Copyright Notice.
Off
-48V PS and RPS not present
Solid Green
-48V PS or RPS present and functional
Solid Orange
-48V PS or RPS present and failure detected
Off
No interrupts or packet transfer occurring
Blinking Green
System is servicing interrupts
Solid Green
System is actively transferring packets
Off
No ongoing accesses, eject permitted
Solid Green
Device is busy, do not eject
Table 1 – 2811 Front Panel Indicators
State
Description
Off
PVDM1 not installed
Solid Green
PVDM1 installed and initialized
Solid Orange
PVDM1 installed and initialized error
Off
PVDM0 not installed
Solid Green
PVDM0 installed and initialized
Solid Orange
PVDM0 installed and initialized error
Off
AIM1 not installed
Solid Green
AIM1 installed and initialized
Solid Orange
AIM1 installed and initialized error
Off
AIM0 not installed
Solid Green
AIM0 installed and initialized
Solid Orange
AIM0 installed and initialized error
Table 2 – 2811 Rear Panel Indicators
State
Description
Off
Solid/Blinking Green
Off
Solid Green
One Blink Green
Two Blink Green
Off
Solid Green
Table 3 – 2811 Ethernet Indicators
Not receiving packets
Receiving packets
Half-Duplex
Full-Duplex
10 Mbps
100 Mbps
No link established
Ethernet link is established
FIPS 140-2 Logical Interface
Data Input Interface
7