Cisco 2851 - Integrated Services Router Hızlı Başlangıç Kılavuzu - Sayfa 13
Ağ Yönlendiricisi Cisco 2851 - Integrated Services Router için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Cisco 2851 - Integrated Services Router 47 sayfaları. Power up and initial configuration procedures
Ayrıca Cisco 2851 - Integrated Services Router için: Kurulum ve Yükseltmeler (21 sayfalar), Veri Sayfası (20 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Konfigürasyon (10 sayfalar)
Sayfayı Yazdır
Rack-Mounting the Router
Cisco 2811, Cisco 2821, and Cisco 2851 routers can be installed in 19- and 23-inch (48.26-cm and 58.42-cm) racks. Cisco 2801
routers can be installed only in 19-inch racks, and cannot be center mounted. Use the standard brackets for mounting the chassis
in a 19-inch rack; use the optional larger brackets for mounting the chassis in a 23-inch rack.
You can mount the router in the following ways:
• Center mounting—Brackets attached in the center of the chassis with only the front panel facing forward
• Front mounting—Brackets attached at the front of the chassis with the front panel facing forward
• Rear mounting—Brackets attached at the rear of the chassis with the rear panel facing forward
The brackets are shown in Figure 4, Figure 5, and Figure 6.
Figure 4
Brackets for Rack-Mounting of Cisco 2801 Routers
Figure 5
Brackets for Rack-Mounting of Cisco 2811 Routers
Bracket pair for 19-inch rack
Figure 6
Brackets for Rack-Mounting of Cisco 2821 and Cisco 2851 Routers
Bracket pair for 19-inch rack
Attaching Brackets to the Router for Rack-Mounting
Attach the mounting brackets to the router chassis as shown in Figure 7 through Figure 9, using the screws provided.
Caution
Do not overtorque the screws. The recommended torque is 15–18 in-lb (1.7–2.0 N-m).
Bracket pair for 23-inch rack
Bracket pair for 23-inch rack
13