Epson EMP-830 Hızlı Referans Kılavuzu - Sayfa 18

Projektör Epson EMP-830 için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Epson EMP-830 20 sayfaları. Esc/vp21 command user's guide for business projectors
Ayrıca Epson EMP-830 için: Kullanım Kılavuzu (36 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Şartname Sayfası (3 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (28 sayfalar)

Install the new lamp.

cover.

operating time

Reset the lamp operating time as described in the following section.

After replacing the lamp, be sure to reset the lamp operating time from the configuration menu.

Do not reset the lamp operating time except after the lamp has been replaced. If you do, the lamp

operating time will no longer be displayed correctly.

Holding the lamp facing the correct way, insert the lamp

until it clicks into place then tighten the two fixing screws.

Slide the cover back to its original position and then tighten

the lamp cover fixing screw at the side of the projector.

• Install the lamp securely. If the lamp cover is removed, the lamp

turns off automatically as a safety precaution. Moreover, the lamp

will not turn on if the lamp or the lamp cover is not installed

correctly.

• This product includes a lamp component that contains mercury

(Hg). Please consult your state and local regurations regarding

disposal or recycling. Do not put in the trash.

1. Press

The configuration menu is displayed.

2. Select "Reset" - "Lamp-Hours Reset" and press

3. Select "Yes" then press

The lamp operating time is reset.

19 17