Epson EMP-8300 Kullanıcı Kılavuzu - Sayfa 27

Projektör Epson EMP-8300 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson EMP-8300 28 sayfaları. Esc/vp21 command user's guide for business projectors
Ayrıca Epson EMP-8300 için: Kullanım Kılavuzu (36 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Hızlı Referans Kılavuzu (16 sayfalar), Tamamlayıcı Kılavuz (2 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Kullanıcı Kılavuzu (28 sayfalar)

Epson EMP-8300 Kullanıcı Kılavuzu

9.Appendix

9.1.Communication specification.
A projector and a computer can be connected using a serial or USB port. The projector can be remotely controlled by sending
commands to the projector.
Serial Connection (600/800/810/811/820,30/52,73/53/74/54,8300/9300,7800/7850,S1/S1H,61/81,830/835/821,828/7900/7950,62/82,6100/
6000,1815/1810/1825,83/822/83+/822+,280,6110/6010,400W/410W,G5350/G5300/G5150/G5100/G5200W/G5000,84/85/824/
825/826W, Z8000WU/Z8050W)
• Select RS-232C at Advanced Setting of the Menu.
• Communication condition
Baud rate
Data length
Parity
Stop bit
Flow control
• Connector
• Projector input
<Projector>
*DTR and DSR are not used.
USB Connection (600/800/810/811/820,720/730/520,73/53/74/54,735,8300/9300,7800/7850/61/81,830/835,740/745/732/737,821/828,7900/
7950,S3/S4,765/760,755/750,62/82/X3(76),1715/1710/1705/1700,S5/X5/EX90,260,G5350/G5150/S6/X6/W6,1735W/1730W/1725/1720)
• For 600/800/810/811/820, select USB at Advanced Setting of the Menu.
• For 730/720/520/735/740/745/732/737/S3/765/760/755/750/X3(76)/S4/1715/1710/1705/1700/S5/X5/260,select Link 21L at
Advanced Setting of the Menu.
• For 8300/8350/9300,select USB at Advanced2 Setting of the Menu.
• For 61/81/830/835/821,select USB at Extended Setting of the Menu.
• For S6/X6/W6/1735W/1730W/1725/1720,select Wireless Mouse and select Link 21Lat Extended Setting of the Menu.
• Epson USB COM Driver has to be installed in your computer to use USB for communication. A COM port is added to your
computer, when the projector and your computer is connected by a USB cable. The added COM is listed at PORT (COM/LPT)
in the device manager tab of System in Control Panel as EPSON COM Emulation port (COMn).
USB COM Driver
EMPUSBSetup.exe
EMPUSB2Setup.exe
• Connector
ESC/VP21 Command User's Guide for Business Projectors
: 9600 bps
: 8 bits
: No
: 1 bit
: No
: D-sub 9pin
: Control(RS-232C)
Projector
GND
5
RD
2
TD
3
Signal name
GND
TD
RD
7800/7850/8300/9300/61/81/830/835/740/745/732/737/
821/828/7900/7950/S3/765/760/755/750/62/82/X3(76)S4/
1715/1710/1705/1700/S5/X5/EX90/260/S6/X6/W6/1735W/
: USB(B type)
<Projector>
PC serial cable
Function
Common ground
Transmitted data
Received data
Models
600/800/810/811/820/720/730/520/73/53/74/54/735
1730W/1725/1720
27 of 28
<Computer>
Computer
5
GND
3
TD
2
RD
<Computer>