Epson EMP-835 Hızlı Referans Kılavuzu - Sayfa 15

Projektör Epson EMP-835 için çevrimiçi göz atın veya pdf Hızlı Referans Kılavuzu indirin. Epson EMP-835 20 sayfaları. Esc/vp21 command user's guide for business projectors
Ayrıca Epson EMP-835 için: Kullanım Kılavuzu (36 sayfalar), Kullanıcı Kılavuzu (24 sayfalar), Şartname Sayfası (3 sayfalar), Teknik Özellikler (1 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Kullanıcı Kılavuzu (28 sayfalar)

Sayfayı Yazdır

Reading the Indicators

The projector is provided with indicators to notify

you of the projector operating status.

The following tables show what the indicators

mean and how to remedy the problems that

they indicate.

When the Power indicator is lit/flashing red

Red

Internal error

Fan related error/

Sensor error

Red

Lamp open error

Lamp timer failure

Lamp out

Lamp cover is open

Problem/Warning

Disconnect the power cable from the electrical outlet.

Then contact your dealer or the nearest address provided in the "International Warranty

Conditions" section of the Safety Instructions/World-Wide Warranty Terms booklet.

Check if the lamp is broken.

Disconnect the power plug from the electrical outlet and wait for the lamp to cool down

sufficiently (takes about one hour) before checking.

If the lamp is

not broken

Replace the

lamp and

then turn the

power on.

If the lamp is

Contact your local dealer for further advice.

broken

Indicates the

operating status of

the projector

Indicates the

lamp status

Indicates the internal

temperature status

If the problem is still not solved after the lamp is

If the lamp

replaced, stop using the projector and disconnect

still does not

the power cable from the electrical outlet. Then

turn on,

contact your dealer or the nearest address

replace it with

provided in the "International Warranty Conditions"

a new lamp.

section of the Safety Instructions/World-Wide

Warranty Terms booklet.

User's Guide "Reading the Indicators"

If all indicators are switched off,

check that the power cable is

connected correctly and that

power is being supplied normally.

lit

flashing

off