Cisco 3600 Series Yapılandırma Kılavuzu - Sayfa 27

Ağ Yönlendiricisi Cisco 3600 Series için çevrimiçi göz atın veya pdf Yapılandırma Kılavuzu indirin. Cisco 3600 Series 36 sayfaları. Memory upgrade
Ayrıca Cisco 3600 Series için: Ürüne Genel Bakış (10 sayfalar), Yükseltme Talimatları (30 sayfalar), Kullanıcı El Kitabı (17 sayfalar), Uygulama Notu (41 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Ekler (15 sayfalar), Kullanıcı Kılavuzu (7 sayfalar), Manuel (5 sayfalar), Yapılandırma Notu (23 sayfalar), Yapılandırma Notu (18 sayfalar), Yapılandırma Notu (25 sayfalar)

Sayfayı Yazdır
Cisco 3600 Series Yapılandırma Kılavuzu
R12-e establish the WAN connection between the two offices. Because one POTS telephony device
is connected to Router RLB-2, it has also been configured for only one POTS peer and one VoIP
peer.
Note
the topology of this FXS-to-FXS connection example.
Figure 12
Dial peer 1
POTS
Configuration for Router RLB-1
In this example, only the calling end (Router RLB-1) is request RSVP. Figure 12 illustrates
FXS-to-FXS Connection Example
64 kbps
Voice port
Serial port
1/0/0
0/0
Router
RLB-1
hostname rlb-1
! Create voip dial peer 10
dial-peer voice 10 voip
! Define its associated telephone number and IP address
destination-pattern +4155554000
session target ipv4:40.0.0.1
! Request RSVP
req-qos guaranteed-delay
! Create pots dial peer 1
dial-peer voice 1 pots
! Define its associated telephone number and voice port
destination-pattern +4085554000
port 1/0/0
! Configure serial interface 0/0
interface Serial0/0
ip address 10.0.0.1 255.0.0.0
no ip mroute-cache
! Configure RTP header compression
ip rtp header-compression
ip rtp compression-connections 25
! Enable RSVP on this interface
ip rsvp bandwidth 48 48
fair-queue 64 256 36
Serial port
IP cloud
1/0
1/3
Router
128 kbps
RLB-w
Configuring Voice over IP for the Cisco 3600 Series VC-39
FXS-to-FXS Connection Using RSVP
Serial port
1/3
1/0
Router
64 kbps
R12-e
Serial port
1/0
Router
RLB-2
Voice port
1/0/0
Dial peer 2
POTS