Epson EMP-S3 Kullanıcı Kılavuzu - Sayfa 7
Projektör Epson EMP-S3 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Epson EMP-S3 28 sayfaları. Esc/vp21 command user's guide for business projectors
Ayrıca Epson EMP-S3 için: Kullanıcı Kılavuzu (25 sayfalar), Kurulum Kılavuzu (25 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Kullanıcı Kılavuzu (28 sayfalar), Hızlı Başlangıç Kılavuzu (12 sayfalar)
Sayfayı Yazdır
6. Error Status
A projector returns the error status when a projector receives "ERR?" command.
The following projectors can return the error status while the projectors become
the error status after cooling down.
EMP-1700/1705/1710/1715, 6000/6100/6110/6010, 1815/1810/1825, S5/X5/83/
EB-G5000/G5100/G5150/G5200W/G5300/G5350
And later models.
[The other models except the above models]
The models except the above models can return the error status while the projectors
The following table shows the return codes and the meaning of error status.
Command
ERR?
ESC/VP21 Command User's Guide for Business Projectors
00 :There is no error or the error is recovered
01 : Fan error
03 : Lamp failure at power on
04 : High internal temperature error
06 : Lamp error
07 : Open Lamp cover door error
08 : Cinema filter error
09 : Electric dual-layered capacitor is disconnected
0A : Auto iris error
0B : Subsystem Error
0C : Low air flow error
0D : Air filter air flow sensor error
0E : Power supply unit error (Ballast)
0F : Shutter error
10 : Cooling system error (peltiert element)
11 : Cooling system error (Pump)
12 : Static iris error
13 : Power supply unit error (Disagreement of Ballast)
14 : Exhaust shutter error
15 : Obstacle detection error
16 : IF board discernment error
Return code
~ 7~