Cisco 3800 Series Yapılandırma - Sayfa 6

Ağ Yönlendiricisi Cisco 3800 Series için çevrimiçi göz atın veya pdf Yapılandırma indirin. Cisco 3800 Series 32 sayfaları. Password recovery procedure
Ayrıca Cisco 3800 Series için: Veri Sayfası (8 sayfalar), Uygulama Notu (41 sayfalar), Sorun Giderme Kılavuzu (15 sayfalar), Veri Sayfası (20 sayfalar), Hızlı Başlangıç Kılavuzu (40 sayfalar), Kullanıcı Kılavuzu (7 sayfalar)

Sayfayı Yazdır

How to Configure Radio Settings on an Access Point

DETAILED STEPS

Command or Action

Step 1

enable

Example:

Router> enable

Step 2

configure terminal

Example:

Router# configure terminal

Step 3

interface dot11Radio interface

Example:

Router(config)# interface dot11Radio 0/3/0

Step 4

speed {data-rates | default | ofdm-throughput |

range | throughput}

Example:

Router(config-if)# speed throughput

Step 5

end

Example:

Router(config-if)# end

Step 6

copy running-config startup-config

Example:

Router# copy running-config startup-config

Configuring Radio and Client Device Power Levels on an Access Point

Perform this task to set the transmit power on your AP and the power level on client devices that

associate to the access point.

When a client device associates to the access point, the AP sends the maximum power level setting to

the client.

SUMMARY STEPS

enable

configure terminal

interface dot11Radio interface

Configuring Radio Settings on an Access Point

Purpose

Enables privileged EXEC mode.

Enter your password if prompted.

•

Enters global configuration mode.

Enters configuration mode for the radio interface.

The interface argument is in module/slot/port format,

•

except for the Cisco 800 series and Cisco 1800 series

fixed-configuration routers, where the interface

argument is either 0 or 1.

The 2.4-GHz radio is port 0, and the 5-GHz radio is

•

port 1.

Configures the data rates supported by the access point.

Use the no form of the speed command to disable data

•

rates. When you use the no form of the command, all

data rates are disabled except the rates you name in the

command.

Returns to privileged EXEC mode.

(Optional) Saves your entries in the configuration file.