Cisco 4430 Giriş - Sayfa 5
Ağ Yönlendiricisi Cisco 4430 için çevrimiçi göz atın veya pdf Giriş indirin. Cisco 4430 13 sayfaları. Content router 4430
Sayfayı Yazdır
Chapter 1
Introducing the Content Router 4430
Table 1-2
Item
Slot 0
Slot 1
Back Panel
Power receptacle
Power switch
To avoid electric shock, do not connect safety extra-low voltage
Warning
(SELV) circuits to telephone-network voltage (TNV) circuits. LAN
ports contain SELV circuits, and WAN ports contain TNV circuits.
Some LAN and WAN ports both use RJ-45 connectors. Use caution
when connecting cables.
Table 1-3 describes the LEDs on the front panel.
Table 1-3
Indicator
Power
System
LINK
100 Mbps
Slot 0
Slot 1
78-12541-01
Ports and Receptacles (continued)
Description
Bay for hard drive 0.
Bay not used.
The power cord connects to this plug.
This switch toggles between on and off, even though
the switch always returns to its initial position after
you press it.
A power light on the front panel, when lit, indicates
that the power is on.
LEDs
Color
State
Green
On
Green
On
Green
On
Green
On
Green
On
Green
On
Cisco Content Router 4430 Hardware Installation Guide
System Hardware Features
Description
Power is flowing to the Content Router.
The network connection is active
(packets are being sent or received).
The Content Router is connected to the
network.
The connection is a 100BASE-TX
(Fast Ethernet) connection.
Slot 0 is active.
Slot 1 is active.
1-5