Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion Kurulum Notu - Sayfa 12

Ağ Yönlendiricisi Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için çevrimiçi göz atın veya pdf Kurulum Notu indirin. Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion 18 sayfaları. Distributed forwarding card 4 for ws-x68xx, ws-x69xx, and select ws-x67xx modules
Ayrıca Cisco 6500 - Catalyst Series 10 Gigabit EN Interface Module Expansion için: Kurulum Notu (14 sayfalar), Çözüm Kılavuzu (17 sayfalar), Kurulum Notu (46 sayfalar), Beyaz Kitap (19 sayfalar), Açıklama (1 sayfalar), Ürün Bülteni (6 sayfalar), Uyarı (4 sayfalar), Veri Sayfası (9 sayfalar), Veri Sayfası (18 sayfalar), Beyaz Kitap (18 sayfalar), Yapılandırma Kılavuzu (8 sayfalar), Kurulum Notu (28 sayfalar), Sorun Giderme Kılavuzu (11 sayfalar), Kullanıcı Kılavuzu (17 sayfalar), Kurulum Notu (24 sayfalar), Manuel (19 sayfalar), Kurulum Notu (36 sayfalar)

Installing the MSFC2

Caution

Ensure that the MSFC2 is securely seated before you install and tighten the securing screws. Using the

screws to seat the MSFC2 could warp the card.

Use a Phillips-head screwdriver to install the screws and cap nut (if applicable) that secure the MSFC2

Step 5

to the supervisor engine. (See

for an MSFC2 shipped after November 2001.)

You must install the cap nut (if applicable) and all screws. The screws provide grounding between the

Caution

MSFC2 and the supervisor engine. Failure to install the cap nut and all screws will invalidate the safety

approvals and can cause fire and electrical hazards.

Figure 11

Catalyst 6500 Series Supervisor Engine 1A DRAM Upgrade Installation Note

Figure 11

MSFC2 Shipped Before November 2001—Installing the Securing Screws and Cap Nut

WS-X5530

SWITCH LOAD

100%

SUPERVISOR ENGINE I I I

CONSOLE

for an MSFC2 that shipped before November 2001, or

Figure 12

cap nut

78-14357-02